Kazi Nazrul University B.Tech in Materials and Metallurgical Engineering Cutoff

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff (2025, 2024, 2023) – WBJEE Opening & Closing Ranks

The Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering cutoff 2025 for the General category closed at 30245 rank, showing a significant decrease in competition compared to 2024, where the closing rank was 25165. The cutoff has consistently tightened over the past few years, indicating rising demand for B.Tech. in Metallurgical and Materials Engineering at Kazi Nazrul University.

Admission to the B.Tech. in Metallurgical and Materials Engineering program is conducted through West Bengal Joint Entrance Examinations Board Counselling (via WBJEE) based on WBJEE ranks, with a total of 3 rounds of seat allocation.

Summary

• The closing rank for Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering in 2025 was 30245 for General category.
• Compared to 2024 (25165 rank), the cutoff trend is decrease in compeetition.

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff (Round-wise Latest Year Trends)

The following tables show round-wise closing cutoff ranks category-wise for Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering. Data is shown for the latest available years: 2025, 2024

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff (EWS Category)

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff (General Category)

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff (OBC A Category)

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff (OBC B Category)

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff (SC Category)

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff (ST Category)

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff (TFW Category)

The Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering cutoff 2025 for the General category ranged from an opening rank of 22672 in Round 1 to a closing rank of 30245 in the final round (Round 2). The cutoff increased gradually across counselling rounds, reflecting seat allocation trends during West Bengal Joint Entrance Examinations Board counselling. Candidates securing ranks within this range were eligible for admission to the B.Tech. in Metallurgical and Materials Engineering program at Kazi Nazrul University.

• The final closing rank for Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering in 2025 was 30245 (Round 2).
• The opening rank remained 22672 across all rounds, indicating top preference demand.
• Cutoff ranks expanded gradually from Round 1 to Round 2 during West Bengal Joint Entrance Examinations Board counselling.

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff Trends (2023-2025)

The Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering cutoff has shown a consistent increase in competition over the past 3 years. The closing rank improved from 77100 in 2023 to 25165 in 2024, and further to 30245 in 2025. This indicates a rising demand for the B.Tech. in Metallurgical and Materials Engineering program at Kazi Nazrul University, with more high-ranking candidates opting for this course during West Bengal Joint Entrance Examinations Board.

• The closing rank changed by 46855 ranks from 2023 to 2025 (~60.77%).
• The biggest year-on-year jump was between 2023 and 2024 with a change of 51935 ranks.
• Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering remains highly competitive during counselling rounds.

Cutoff Trend Graph (Closing Rank vs Year)

Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Category-wise Cutoff Analysis 2025

The Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering cutoff 2025 varies significantly across categories due to reservation policies. The closing rank for the General category was 30245, while OBC A candidates had a closing rank of 47667, showing a difference of 17422 ranks, For SC and ST categories, the closing ranks were 49017 and 41533 respectively, indicating comparatively lower competition. This variation is primarily driven by category-wise seat allocation and demand differences during counselling.

• The smallest cutoff gap vs General is for OBC B at 4060 ranks.
• The largest cutoff gap vs General is for EWS at 43441 ranks.
• General category typically remains the most competitive for Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering admission.

Impact of Reservation on Kazi Nazrul University Cutoff

The variation in cutoff ranks across categories is influenced by the reservation policy implemented by the Government of India. A fixed percentage of seats is allocated to OBC-NCL, SC, ST, and EWS categories, resulting in relatively higher closing ranks for reserved categories compared to the General category. This ensures equitable access to premier institutions like Kazi Nazrul University while maintaining merit-based selection through JEE Advanced.

Factors affecting Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering cutoff

Year-wise Trend Impact

A consistent improvement in closing rank over the years suggests increasing competition for Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering, as more high-ranking candidates prefer this course.

Round-wise Cutoff Movement

Cutoff ranks typically expand from the first round to the final round during West Bengal Joint Entrance Examinations Board counselling, as seats are reallocated based on candidate preferences and withdrawals.

Category-wise Variation

Cutoff ranks differ across categories, with General category usually having the lowest closing rank, indicating higher competition compared to reserved categories.

Seat Matrix for Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering

The Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering seat matrix shows that a total of 30 seats are available for the program, distributed across multiple categories. This distribution plays a crucial role in determining cutoff ranks, as categories with fewer seats tend to have more competitive cutoffs.

Kazi Nazrul University vs Peer Colleges B.Tech. in Metallurgical and Materials Engineering Cutoff

The B.Tech. in Metallurgical and Materials Engineering cutoff comparison among peer colleges highlights the relative competitiveness of each institute. Kazi Nazrul University has the lowest closing rank at 30245, making it the most competitive choice .

Cutoff Comparison Insights

• Kazi Nazrul University has the most competitive cutoff
• Competition comparison across colleges is limited
• Higher closing ranks indicate relatively lower competition
• All listed colleges remain competitive within their respective rank ranges

Lowest cutoff: Kazi Nazrul University (Rank ~30245)
Highest cutoff: Kazi Nazrul University (Rank ~30245)

Which College is Best for B.Tech. in Metallurgical and Materials Engineering Based on Cutoff?

Based on cutoff trends, Kazi Nazrul University is the most preferred institute for B.Tech. in Metallurgical and Materials Engineering . Lower closing ranks indicate higher demand and stronger competition among top-ranking candidates.

Other Courses at Kazi Nazrul University Cutoff

Kazi Nazrul University offers a range of B.Tech. in Metallurgical and Materials Engineering, with cutoff ranks varying based on demand and seat availability. B.Tech. in Computer Science & Engineering (Data Science) is the most competitive based on recent data, closing at 15811 , followed by B.Tech. in Metallurgical and Materials Engineering at 30245. Other courses also attract varying levels of competition depending on candidate preferences and seat intake. Reviewing cutoff trends across courses can help in making better admission decisions.

Popular Courses at Kazi Nazrul University Based on Cutoff

• B.Tech. in Computer Science & Engineering (Data Science) has the lowest cutoff → highest demand
• B.Tech. in Metallurgical and Materials Engineering follows as the second most competitive
• B.Tech. in Mining Engineering shows moderate competition
• Core and less preferred branches generally have relatively higher cutoff ranks, indicating lower competition.

Which Course Has the Lowest Cutoff at Kazi Nazrul University?

Among all courses, B.Tech. in Computer Science & Engineering (Data Science) consistently has the lowest cutoff at Kazi Nazrul University, making it the most competitive branch. B.Tech. in Metallurgical and Materials Engineering follows as another highly competitive option , while B.Tech. in Mining Engineering shows moderate competition. Other courses typically have relatively higher cutoff ranks.

FAQs on Kazi Nazrul University B.Tech. in Metallurgical and Materials Engineering Cutoff