Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering Cutoff

Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering Cutoff (2024, 2023, 2022) – TNEA Opening & Closing Ranks

The Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering cutoff 2024 for the General category closed at 40811 rank, showing a significant increase in competition compared to 2023, where the closing rank was 47459. The cutoff has consistently tightened over the past few years, indicating rising demand for B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai.

Admission to the B.E. in Manufacturing Engineering program is conducted through Directorate of Technical Education (DoTE), Chennai Counselling (via TNEA) based on TNEA ranks, with a total of 3 rounds of seat allocation.

Summary

• The closing rank for Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering in 2024 was 40811 for General category.
• Compared to 2023 (47459 rank), the cutoff trend is increase in competition.

Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering Cutoff (Round-wise Latest Year Trends)

The following tables show round-wise closing cutoff ranks category-wise for Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering. Data is shown for the latest available years: 2023, 2022

Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering Cutoff (EWS Category)

Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering Cutoff (General Category)

Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering Cutoff (GeneralPwD Category)

The Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering cutoff 2024 for the General category ranged from an opening rank of 23836 in Round 1 to a closing rank of 40811 in the final round (Last Round). The cutoff increased gradually across counselling rounds, reflecting seat allocation trends during Directorate of Technical Education (DoTE), Chennai counselling. Candidates securing ranks within this range were eligible for admission to the B.E. in Manufacturing Engineering program at Central Institute of Plastics Engineering and Technology, Chennai.

• The final closing rank for Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering in 2024 was 40811 (Last Round).
• The opening rank remained 23836 across all rounds, indicating top preference demand.
• Cutoff ranks expanded gradually from Round 1 to Last Round during Directorate of Technical Education (DoTE), Chennai counselling.

Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering Cutoff Trends (2022-2024)

The Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering cutoff has shown a decrease in competition over the past 3 years. The closing rank dropped from 35647 in 2022 to 47459 in 2023, and further to 40811 in 2024. This indicates a decreasing demand for the B.E. in Manufacturing Engineering program at Central Institute of Plastics Engineering and Technology, Chennai, with fewer high-ranking candidates opting for this course during Directorate of Technical Education (DoTE), Chennai.

• The closing rank changed by 5164 ranks from 2022 to 2024 (~14.49%).
• The biggest year-on-year jump was between 2022 and 2023 with a change of 11812 ranks.
• Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering remains highly competitive during counselling rounds.

Cutoff Trend Graph (Closing Rank vs Year)

Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering Category-wise Cutoff Analysis 2024

The Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering cutoff 2024 varies significantly across categories due to reservation policies. The closing rank for the General category was 40811. This variation is primarily driven by category-wise seat allocation and demand differences during counselling.

• Category gap comparison is limited due to missing data.
• Large-gap category insight is not available.
• General category typically remains the most competitive for Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering admission.

Impact of Reservation on Central Institute of Plastics Engineering and Technology, Chennai Cutoff

The variation in cutoff ranks across categories is influenced by the reservation policy implemented by the Government of India. A fixed percentage of seats is allocated to OBC-NCL, SC, ST, and EWS categories, resulting in relatively higher closing ranks for reserved categories compared to the General category. This ensures equitable access to premier institutions like Central Institute of Plastics Engineering and Technology, Chennai while maintaining merit-based selection through JEE Advanced.

Factors affecting Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering cutoff

Year-wise Trend Impact

A consistent improvement in closing rank over the years suggests increasing competition for Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering, as more high-ranking candidates prefer this course.

Round-wise Cutoff Movement

Cutoff ranks typically expand from the first round to the final round during Directorate of Technical Education (DoTE), Chennai counselling, as seats are reallocated based on candidate preferences and withdrawals.

Category-wise Variation

Cutoff ranks differ across categories, with General category usually having the lowest closing rank, indicating higher competition compared to reserved categories.

Seat Matrix for Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering

The Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering seat matrix shows that a total of 60 seats are available for the program, distributed across multiple categories. This distribution plays a crucial role in determining cutoff ranks, as categories with fewer seats tend to have more competitive cutoffs.

Central Institute of Plastics Engineering and Technology, Chennai vs Peer Colleges B.E. in Manufacturing Engineering Cutoff

The B.E. in Manufacturing Engineering cutoff comparison among peer colleges highlights the relative competitiveness of each institute. Central Institute of Plastics Engineering and Technology, Chennai has the lowest closing rank at 40811, making it the most competitive choice .

Cutoff Comparison Insights

• Central Institute of Plastics Engineering and Technology, Chennai has the most competitive cutoff
• Competition comparison across colleges is limited
• Higher closing ranks indicate relatively lower competition
• All listed colleges remain competitive within their respective rank ranges

Lowest cutoff: Central Institute of Plastics Engineering and Technology, Chennai (Rank ~40811)
Highest cutoff: Central Institute of Plastics Engineering and Technology, Chennai (Rank ~40811)

Which College is Best for B.E. in Manufacturing Engineering Based on Cutoff?

Based on cutoff trends, Central Institute of Plastics Engineering and Technology, Chennai is the most preferred institute for B.E. in Manufacturing Engineering . Lower closing ranks indicate higher demand and stronger competition among top-ranking candidates.

Other Courses at Central Institute of Plastics Engineering and Technology, Chennai Cutoff

Central Institute of Plastics Engineering and Technology, Chennai offers a range of B.E. in Manufacturing Engineering, with cutoff ranks varying based on demand and seat availability. B.E. in Manufacturing Engineering is the most competitive based on recent data, closing at 40811 . Other courses also attract varying levels of competition depending on candidate preferences and seat intake. Reviewing cutoff trends across courses can help in making better admission decisions.

Popular Courses at Central Institute of Plastics Engineering and Technology, Chennai Based on Cutoff

• B.E. in Manufacturing Engineering has the lowest cutoff → highest demand
• Second course data unavailable
• Additional course comparison limited
• Core and less preferred branches generally have relatively higher cutoff ranks, indicating lower competition.

Which Course Has the Lowest Cutoff at Central Institute of Plastics Engineering and Technology, Chennai?

Among all courses, B.E. in Manufacturing Engineering consistently has the lowest cutoff at Central Institute of Plastics Engineering and Technology, Chennai, making it the most competitive branch. . Other courses typically have relatively higher cutoff ranks.

FAQs on Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering Cutoff